Multi-Functional Health And Massage Footbath

The 802D-W is a new footbath with a large 9 litre water tank. Intelligent one-touch start also with wireless remote control and LCD digital display. With massage, heating, ambient light and mode selection functions. The massage function is equipped with six sets of five-bead taiji rollers on the bottom of the feet and a shower function, which stimulates the leg and foot acupuncture points more effectively after switching on, promotes blood circulation, improves metabolism, improves sleep quality, eliminates fatigue, promotes health and improves body immunity. The mode selection function allows you to select the appropriate footbath mode (adult mode, child mode, health mode and sleep mode) according to your personal needs after switching on. In the ambient light function, it can effectively regulate the customer's nervous and excited mood in life or work, which is a comfortable and restful state of mind for the body and mind. Heating up and cooling down can control and maintain the water temperature that the human body feels comfortable with. After switching on the machine, it can be adjusted at will between 35-48 degrees to reach the temperature you set. This machine will automatically maintain a constant temperature, so that you can enjoy the comfort brought to you by the foot bath, more attention to humane design, to bring people a new experience, enjoy.

1) Product dimensions: L350mm *W348mm *H311mm

2) Outer box size: L420.mm*W400mm*H370mm (outer size)

3）Product quality: 4.5KG (gross weight plus medicine package) 3.3KG (net weight)

Packing number:1PCS/CTN

Contact now

PREV：Electric Massage Foot Soaking Tub NEXT：Electric Massage Footbath With Constant Temperature For Home Use

PRODUCT DESCRIPTION

technical parameter
External/Internal Inspection
Machine reliability test
Packaging and Product Identification

Number	Test items	Test conditions: 15 minutes after the whole machine works normally
		Input voltage specification: 220V AC ∕50Hz
		Test instrument: Frequency meter Noise meter Stroboscope Power meter Electronic scale Stopwatch Tape measure Tensiometer
1	Rated power	Rated power 450W
2	Current	Normal working current 3.5A, maximum inrush current 6.8A
3	Massage motor	DC220V Permanent magnet DC motor
4	PTC Heater	220V 50Hz/60Hz 450W
5	Noise	Distance from the product around 3ft, the maximum noise value ≤ 39dB
6	Power cord length	Power cord exposed ≥5.9ft.

Visual inspection:
Number	Check item	Inspection criteria
1	Appearance of the whole machine	1. There should be no scratches, chips, grease, dirt or stains on the surface of the whole machine.
		2. All appearance labels are used correctly and in the correct position.
		3. The appearance is bright, and the whole machine has no obvious color difference.
		4. The surface sticker is beautiful and flat, the position is correct, and there is no obvious dislocation by visual inspection.
		5. The position of the digital display screen is correct, and there are no defects such as tilt and dislocation.
2	AC power cord	1. The specifications are correct (PBB-10/10A/250V/60227 IEC 53(RVV) 300/500V 2*0.75mm² ), and the exposed wire length is greater than 1.3m (excluding the clip).
		2. The color is consistent with the description of the BOM, and the outer surface is clean and free of dirt.
3	Trademark Check	The product trademark should be displayed on the product silk screen, color box and manual.
4	The date code is in the correct format	The date code is in the correct format "yyyymmdd"
5	rear panel placement	The rear panel should be placed in a suitable position, and there should be no drop or slip into the barrel.
6	Drain valve turning force	The turning force of the water outlet is moderate, neither too tight nor too loose.

Internal inspection:
Number	Check item		Inspection criteria
1	Main part parameters	Massage motor (permanent magnet DC motor)	1. No-load operation DC220V/speed 2500±10%RPM/current≤0.035A
			2. Rated operation DC220V/rated speed 2000±10%RPM/rated power 14W
			3. Motor life: running at rated power: more than 1000 hours.
			4. Withstand voltage: 1800VAC/30MA/1SEC
			5. The diameter of the rotating shaft is φ8mm, and the axial clearance is 0.3mmMAX
			6. Insulation class: E
			7. Cooling method: natural cooling
			8. Rotation direction: CW/CCW (clockwise/counterclockwise)
		PTC heater	1. The appearance is clean, no deformation, no cracks, no obvious scratches, no pits, no looseness of the PTC heating element after the aluminum parts are stamped, and no damage or looseness of the leads and casings.
			2. Comply with the requirements of product technical icons.
			3. Withstand voltage: The device is powered on for 2220V/1min and then turned to 330V/3min. During this test, the device has no spark, smoke, burst, or breakdown.
			4. Insulation withstand voltage: 4500V(AC)/2mA/2 seconds, no breakdown phenomenon.
			5. Impulse current: power-on 220V (AC) (rated voltage) test, the inrush current is less than or equal to 8A.
			6. Power for 1 minute: Put the device into a special container and pour 1440ml of cold water (water temperature is 22-28 ℃), and the power is 405-472W when the power is turned on for 1 minute.
2	Screw Torque Requirements	Base	ST4*14 F≥5kgf.cm The screw shall not slip and the plastic parts shall be damaged.
3	Gap and Match	Gap≤0.8mm
4	Internal and external routine inspection	1. No screws and other foreign objects are left inside the body.
		2. All the lines are neat and clear, and there can be no intersection.

Since 2009

Ningbo Yuesheng Healthy Technology Co., Ltd.

We are located in Cixi City, Zhejiang Province, covering an area of 26,000 square meters. We are a professional foot bath manufacturer with 13 years of experience. As Custom Multi-Functional Health And Massage Footbath Suppliers in China, the company has more than 600 employees, including about 60 professional and technical personnel. The company has 16 advanced production lines, 20 large-tonnage injection molding units, various production auxiliary equipment and complete testing equipment, with a daily production capacity of 40,000 units, a finished product storage capacity of 1 million units, and an annual output of more than 6 million units. At present, it is a foot bath manufacturer with powerful scale and production capacity in the same industry in China.

13 Years Experience

We have a professional design and development team with rich industry experience and product development experience, which can meet various customization needs. As OEM Multi-Functional Health And Massage Footbath Factory, our products enjoy a high reputation in the industry and a good reputation among customers. Our principle is "quality first, reputation first", serve every customer well, and all products will be 100% inspected before shipment. We are looking for reliable partners all over the world. Please feel free to contact us.

Number	Test items	standard test
1	Pressure test	aboratory	Whole machine: 2500V 3S 5mA
2	Drop test	The whole machine including the outer box packaging test: including the outer box packaging, make a free fall from a height of 1.5 meters, and drop it once each in the way of one corner, three edges and six sides. It is required that the product is not damaged and functions normally.
3	Stationarity Test	The product should be stable when placed on a horizontal glass plate, and the gap between the feet and the glass plate should be ≤0.5mm.
4	Power cord pull	AC power cord: Use 35lbs (155.69N) to pull continuously for 1Min, the displacement of the wire sheath should not exceed 2mm, and the wire core has no displacement
5	Stability test	The most unfavorable position of the product in normal use is placed on a 10° inclined plane. No water spills, no tipping over.
6	Noise and abnormal sound detection	3ft away from the product, the maximum noise value is ≤39dB, and there should be no obvious abnormal sound when the prototype is working.
7	Foot pad detection	The prototype is placed on a horizontal wooden board, and the prototype is moved horizontally in the state of being filled with water or without water, and the foot pads cannot fall off or be deformed.
8	Indicator function check	Input the rated voltage of 220V/50Hz, turn on the switch, the LED indicator will be on and the brightness will be uniform. Turn off the switch and the LED indicator goes off.
9	life span test	The time has accumulated for about 600 hours continuously, and the function is normal.
10	Drain valve torque test	Tightening and unscrewing torque of drain valve ≤30kgf.cm
11	One-click start test	The whole machine runs for 10 minutes and closes for 10 minutes as a cycle, and it can work normally after 1800 cycles.

Number	Test items	standard test
1	Packaging accessories	All packaging accessories, labeling, etc. shall not be overpacked, underpacked, or not packed, and must meet the requirements of the BOM.
		The first sample must be confirmed by the business before packaging.
		When the product is put into the colour box, the front corresponds to the pattern of the colour box, with the fog outlet facing the front and the switch all in the off position.
2	Carton size	1. L420W400H370mm(outer size).
		2. The content of the color box printing pattern should be correct and meet the packaging requirements.
		3. The bottom of the color box is printed with barcode and date code.

Web Menu

Product Search

Language

Exit Menu